Delivery to Francestandard and express shippingFree shipping over €65 · Free over €65

KM Lock Nuts and MB Lock Washers (DIN 981, DIN 5406)

KM slotted lock nuts to DIN 981 and MB tab washers to DIN 5406, from KM0 (M10 x 0.75) to KM20 (M100 x 2), to locate bearings and adapter sleeves on threaded shafts.

KM Lock Nuts and MB Lock Washers (DIN 981, DIN 5406) size chart

Part no.d / IDD / ODWidthVersions
KM010
MB010
KM112
MB112
KM215
MB215
KM317
MB317
KM420
MB420
KM525
MB525
KM630
MB630
KM735
MB735
KM840
MB840
KM945
MB945
KM1050
MB1050
KM1155
MB1155
KM1260
MB1260
KM1365
MB1365
KM1470
MB1470
KM1575
MB1575
KM1680
MB1680
KM1785
MB1785
KM1890
MB1890
KM1995
MB1995
KM20100
MB20100
Dimensions in millimetres. Prices and lead times are on request.

Fitting a KM lock nut and its MB washer

Slide the MB washer onto the shaft with its inner tab in the keyway, then screw on the KM nut with the chamfered side towards the washer and tighten it with a hook spanner. Bend one outer tab of the washer into the slot of the nut that lines up best, tightening the nut slightly rather than loosening it to align a slot. A bent washer should not be reused: fit a new MB washer each time the nut is removed.

Compare