Delivery to Francestandard and express shippingFree shipping over €65 · Free over €65

ISO 8752 Slotted Spring Pins (DIN 1481)

Slotted spring pins (roll pins), heavy type, to ISO 8752 (DIN 1481): they are driven into a drilled hole and hold by their own spring tension. Diameters from 1.5 to 12 mm, in spring steel and stainless steel.

ISO 8752 Slotted Spring Pins (DIN 1481) size chart

Part no.Versions
1.5 x 4
1.5 x 5
1.5 x 6
1.5 x 8
1.5 x 10
1.5 x 12
1.5 x 14
1.5 x 16
1.5 x 18
1.5 x 20
2 x 4
2 x 5
2 x 6
2 x 8
2 x 10
2 x 12
2 x 14
2 x 16
2 x 18
2 x 20
2 x 22
2 x 24
2 x 26
2 x 28
2 x 30
2.5 x 4
2.5 x 5
2.5 x 6
2.5 x 8
2.5 x 10
2.5 x 12
2.5 x 14
2.5 x 16
2.5 x 18
2.5 x 20
2.5 x 22
2.5 x 24
2.5 x 26
2.5 x 28
2.5 x 30
3 x 4
3 x 5
3 x 6
3 x 8
3 x 10
3 x 12
3 x 14
3 x 16
3 x 18
3 x 20
3 x 22
3 x 24
3 x 26
3 x 28
3 x 30
3 x 32
3 x 35
3 x 40
4 x 4
4 x 5
4 x 6
4 x 8
4 x 10
4 x 12
4 x 14
4 x 16
4 x 18
4 x 20
4 x 22
4 x 24
4 x 26
4 x 28
4 x 30
4 x 32
4 x 35
4 x 40
4 x 45
4 x 50
5 x 5
5 x 6
5 x 8
5 x 10
5 x 12
5 x 14
5 x 16
5 x 18
5 x 20
5 x 22
5 x 24
5 x 26
5 x 28
5 x 30
5 x 32
5 x 35
5 x 40
5 x 45
5 x 50
5 x 55
5 x 60
5 x 65
5 x 70
5 x 75
5 x 80
6 x 10
6 x 12
6 x 14
6 x 16
6 x 18
6 x 20
6 x 22
6 x 24
6 x 26
6 x 28
6 x 30
6 x 32
6 x 35
6 x 40
6 x 45
6 x 50
6 x 55
6 x 60
6 x 65
6 x 70
6 x 75
6 x 80
Prices and lead times are on request.

Slotted spring pins: holes and fitting

A slotted spring pin is rolled from spring steel strip and is slightly larger than its nominal diameter. Driven into a hole drilled to the nominal size, it closes up and holds by friction, with no reaming needed. It fixes hubs, levers and collars on shafts, and serves as a hinge or stop pin. Drive it in with a hammer and a flat punch, chamfered end first; it can be driven out again.

Compare