Delivery to Francestandard and express shippingFree shipping over €65 · Free over €65

HK Drawn Cup Needle Roller Bearings

HK drawn cup needle roller bearings with open ends: a thin-walled outer ring pressed into the housing, with the needle rollers running directly on the shaft. Shaft diameters from 3 to 50 mm.

HK Drawn Cup Needle Roller Bearings size chart

Part no.d / IDD / ODWidthVersions
HK030636.56
HK0408488
HK0509599
HK06096109
HK07097119
HK08088128
HK081081210
HK091091310
HK091291312
HK1010101410
HK1012101412
HK1015101415
HK1210121610
HK1212121812
HK1312131912
HK1412142012
HK1512152112
HK1516152116
HK1612162212
HK1616162216
HK1712172312
HK1812182412
HK1816182416
HK2010202610
HK2012202612
HK2016202616
HK2020202620
HK2212222812
HK2216222816
HK2220222820
HK2512253212
HK2516253216
HK2520253220
HK2526253226
HK2816283516
HK2820283520
HK3012303712
HK3016303716
HK3020303720
HK3026303726
HK3512354212
HK3516354216
HK3520354220
HK4012404712
HK4016404716
HK4020404720
HK4512455212
HK4516455216
HK4520455220
HK5020505820
HK5025505825
Dimensions in millimetres. Prices and lead times are on request.

HK drawn cup needle bearings: the smallest radial section

An HK bearing is a thin, drawn steel cup holding a cage of needle rollers, open at both ends. It is pressed into the housing bore and needs no further axial retention. The rollers normally run directly on the shaft, which must be hardened and ground; otherwise an inner ring is added. In the designation, HK1612 means a 16 mm shaft and a 12 mm width. Press the bearing in with a mandrel that bears on the marked end face.

Compare