Delivery to Francestandard and express shippingFree shipping over €65 · Free over €65

DIN 988 Shim Rings

Precision shim rings to DIN 988 in spring steel, to adjust axial play on shafts and bearings. Thicknesses from 0.1 to 1 mm.

DIN 988 Shim Rings size chart

Part no.d / IDD / ODWidthVersions
3x6360.1–1
4x8480.1–1
5x105100.1–1
6x126120.1–1
7x137130.1–1
8x148140.1–1
10x1610160.1–1
12x1812180.1–1
13x1913190.1–1
14x2014200.1–1
15x2115210.1–1
16x2216220.1–1
17x2417240.1–1
18x2518250.1–1
20x2820280.1–1
22x3022300.1–1
22x3222320.1–1
25x3525350.1–1
26x3726370.1–1
28x4028400.1–1
30x4230420.1–1
32x4532450.1–1
35x4535450.1–1
36x4536450.1–1
37x4737470.1–1
40x5040500.1–1
42x5242520.1–1
45x5545550.1–1
45x5645560.1–1
48x6048600.1–1
50x6250620.1–1
50x6350630.1–1
52x6552650.1–1
55x6855680.1–1
56x7256720.1–1
60x7560750.1–1
63x8063800.1–1
70x9070900.1–1
75x9575950.1–1
80x100801000.1–1
85x105851050.1–1
90x110901100.1–1
100x1201001200.1–1
Dimensions in millimetres. Prices and lead times are on request.

DIN 988 shim rings: setting axial play

Shim rings are thin, precise steel rings used to take up tolerances: the axial play of a bearing, the mesh position of a gear, the clearance behind a retaining ring. They are stacked to obtain the thickness required, measured with feeler gauges or a micrometer. The designation gives the inside diameter, the outside diameter and the thickness; the diameters follow the usual shaft and bore sizes.

Compare