Delivery to Francestandard and express shippingFree shipping over €65 · Free over €65

DIN 472 Internal Retaining Rings for Bores

DIN 472 internal retaining rings (circlips) for bores, in spring steel and in stainless steel. Bore diameters from 8 to 100 mm.

DIN 472 Internal Retaining Rings for Bores size chart

Part no.d / IDD / ODWidthVersions
DIN 472 88
DIN 472 99
DIN 472 1010
DIN 472 1111
DIN 472 1212
DIN 472 1313
DIN 472 1414
DIN 472 1515
DIN 472 1616
DIN 472 1717
DIN 472 1818
DIN 472 1919
DIN 472 2020
DIN 472 2121
DIN 472 2222
DIN 472 2323
DIN 472 2424
DIN 472 2525
DIN 472 2626
DIN 472 2727
DIN 472 2828
DIN 472 2929
DIN 472 3030
DIN 472 3131
DIN 472 3232
DIN 472 3333
DIN 472 3434
DIN 472 3535
DIN 472 3636
DIN 472 3737
DIN 472 3838
DIN 472 4040
DIN 472 4242
DIN 472 4545
DIN 472 4747
DIN 472 4848
DIN 472 5050
DIN 472 5252
DIN 472 5555
DIN 472 5656
DIN 472 5858
DIN 472 6060
DIN 472 6262
DIN 472 6363
DIN 472 6565
DIN 472 6868
DIN 472 7070
DIN 472 7272
DIN 472 7575
DIN 472 7878
DIN 472 8080
DIN 472 8282
DIN 472 8585
DIN 472 8888
DIN 472 9090
DIN 472 9292
DIN 472 9595
DIN 472 9898
DIN 472 100100
Dimensions in millimetres. Prices and lead times are on request.

DIN 472 internal rings for bores

A DIN 472 ring is compressed with internal circlip pliers and springs outward into a groove machined in a bore, where it holds a bearing outer ring, a seal or a bush in place. It is ordered by the bore diameter. The groove is larger in diameter than the bore, and its depth and its distance from the edge of the housing decide the axial load the ring can hold: follow the dimensions of the standard.

Compare