Delivery to Francestandard and express shippingFree shipping over €65 · Free over €65

6300 Series Deep Groove Ball Bearings

6300 series deep groove ball bearings: the heavier range (ISO dimension series 03), with larger balls and thicker rings for higher loads on the same shaft. Bores from 10 to 150 mm, each size open, shielded (ZZ) or sealed (2RS), in normal or C3 clearance.

6300 Series Deep Groove Ball Bearings size chart

Part no.d / IDD / ODWidthVersions
6300103511
6301123712
6302154213
6303174714
6304205215
6305256217
6306307219
6307358021
6308409023
63094510025
63105011027
63115512029
63126013031
63136514033
63147015035
63157516037
63168017039
63178518041
63189019043
63199520045
632010021547
632110522549
632211024050
632412026055
632613028058
632814030062
633015032065
Dimensions in millimetres. Prices and lead times are on request.

6300 series: the medium range for heavier loads

A 6300 bearing has the same bore as the 6200 with the same size code, but a larger outside diameter, a wider section and bigger balls. It carries noticeably more load and withstands shocks better, at a somewhat lower limiting speed. It is the usual choice for larger motors, gearboxes, pumps and vibrating equipment. A 6300 cannot replace a 6200 without changing the housing, since the outside diameter and the width differ.

Compare